VideoSecu Universal LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA Reviews

Posted on 23. Jul, 2010 by Office Design And Build in interior office refurbishment contractors

Tags: , , , , , , , , , , , , ,

5 Responses to “VideoSecu Universal LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA Reviews”

  1. acid6x

    23. Jul, 2010

    Review by acid6x for VideoSecu Universal LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA
    Rating:
    I bought this mount after reading the reviews and was a little edgy about it because of the “one star” review i read that said it might just drop from the ceiling…Well before i hung my projector from it I ACTUALLY GRABBED ONTO IT AND HUNG WITH THE FULL 140LBS OF MY BODY WEIGHT AND IT SLIPPED ABOUT 1/4″ AND THEN CAUGHT. I noticed that if you turn the sliding height adjustment bar upside down it will slip off SO MAKE SURE YOU PUT THAT BAR ON THE RIGHT WAY (try it both ways, the right one will be obvious) If you install it correctly you REALLY CANT BEAT THIS FOR THE MONEY. It is a must that you be somewhat mechanically inclined..if your unsure, have a friend on hand for second opinions and to help you hold everything steady. Once its up its easy to make adjustments and it looks sweet!

  2. Perry

    23. Jul, 2010

    Review by Perry for VideoSecu Universal LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA
    Rating:
    This product worked great for me. (used with a Benq W500 projector) It was helpful how the product description had the maximum point-to-point length of your projector that this mount would be compatible with. So I knew it would fit before I bought it. There were no actual instructions, but it was easy enough to figure out. Just make sure you do it while your cat is out shopping or mowing the lawn; mine enjoyed depositing the little pieces of hardware in hiding places. For the negative, I don’t trust the extension bar; the whole rig is held by one bolt. Make sure you add a safety rope/wire in case it comes loose. (of course, you don’t have to use the extension)

  3. D. B. Church

    23. Jul, 2010

    Review by D. B. Church for VideoSecu Universal LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA
    Rating:
    I bought this mount to be used in a church, Also had a projector that needed a special mount for very close 4 hole mount. This mount was just what the Dr. ordered. Mounts to normal studs just fine, if you turn it the right way… Fixing to order a second one for a rear mount projector to our church.

  4. G. Nair

    23. Jul, 2010

    Review by G. Nair for VideoSecu Universal LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA
    Rating:
    The shaft length is adjustable.

    Lots of adjustment screws to fine tune position of the projector after it has been screwed to the posts.

    Only gotcha is that it comes with 4 mounting legs, but only three 3″ extenders. Using just the 3 that were provided, I could not mount on the four posts of my projector, even though the max distance between any two posts on my projector is 10.5 (within the specs for this kit).

    However, once I contacted the seller, they were quick to mail me the extra extender. All set now.

  5. Eduardo Abraham

    23. Jul, 2010

    Review by Eduardo Abraham for VideoSecu Universal LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA
    Rating:
    I bought this for my HD-65 and besides having to mess with arms a little bit to get it to actually fit this tiny projector I had to use just 3 of the little arms on it. Just a heads up for HD-65 owners. It works great though. It’s solid sturdy and blends in with my white ceiling.. The best I’ve found for the price

Leave a Reply

Security Code: